Engenius ECB600 High-Powered, Long-Range Dual Band Wireless N600 Indoor Access Point / Client Bridge

105

New

Dual Band 300 + 300 Mbps
High Power, Long-Range Coverage
SSID-to-VLAN Tagging
802.3at/af PoE Compatible
High-Gain External / Detachable Antennas
Simplified AP Monitoring and Management

More details

Add to wishlist

More info

Expand the capacity of your business network and get both 2.4 and 5 GHz devices connected
The EnGenius ECB600 is a concurrent Dual Band 2.4 and 5 GHz Wireless N600 Indoor Access Point that features high transmit RF power (29 dBm on 2.4 GHz and 26 dBm on 5 GHz) for long range connectivity. With wireless speeds up to 300 Mbps on each radio and a Gigabit port for connecting to a switch or router, it’s ideal for expanding a network with additional bandwidth to support additional users.
 
 
 
With the dual band Wireless N600 ECB600 companies can now offer employees, guests, staff or students more expanded options for users who transfer large files within the network or use other bandwidth intensive applications like streaming HD video. The AP’s Gigabit Ethernet (10/100/1000) port also offers greater bandwidth capacity and faster data transfers through the network. This high-powered Access Point/Bridge with its enhanced receive sensitivity and internal MIMO (Multiple In/Multiple Out) antenna array extends wireless coverage and enhances connectivity to client devices even in areas where connections have been previously challenging or non-existent and in some buildings it’s wireless signal can penetrate up to 3 floors. This makes the ECB600 ideal for extending networks within large or multi-story buildings or expansive, client-intensive facilities like hotels, resorts, hospitals, office buildings, universities or other multi-building campus facilities.

The ECB600 can be configured to operate in several different modes – as a dual band Wireless-N Access Point, a WDS Access Point, or Repeater. It operates concurrently in the 2.4GHz and 5GHz frequency spectrums supporting 802.11a/b/g/n standards. ECB600 also includes EZ Controller, access point monitoring and management software that provides a robust suite of tools for IT managers, installers and network administrators to monitor the performance of their deployed EnGenius access points and bridges, update them with new firmware or reconfigure the operation mode that they are in from one central location.


Technical Specifications

Hardware
RF: 2.4 and 5 GHz Frequency Bands
Standard: IEEE 802.11a/b/g/n
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 300 Mbps in both frequency bands
Memory: 64MB
Flash Memory: 8MB

Antenna
Four (4) External 5 dBi Omni-Directional Antennas

Physical Interface
1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps)
1 x Reset Button
Power Jack

Power Requirements
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A

Modulations
OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK

Operating Channels
2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165

Receiver Sensitivity
802.11n (5 GHz)
-94dBm @ MCS0
-76dBm @ MCS7
-91dBm @ MCS8
-73dBm @ MCS15

802.11n (2.4 GHz)
-95dBm @ MCS0
-77dBm @ MCS7
-91dBm @ MCS8
-75dBm @ MCS15

802.11a (5 GHz)
-95dBm @ 6Mbps
-80dBm @ 54Mbps

802.11b (2.4 GHz)
-95dBm @ 1Mbps
-91dBm @ 11Mbps

Available Transmit Power
(Max. Power may be different depending on local regulations)
802.11n (5 GHz)
27dBm @ MCS0~2/MCS8~10
26dBm @ MCS3/MCS11
25dBm @ MCS4/MCS12
23dBm @ MCS5/MCS13
22dBm @ MCS6/MCS14
21dBm @ MCS7/MCS15

802.11n (2.4 GHz)
27dBm @ MCS0~2/MCS8~10
27dBm @ MCS3/MCS11
26dBm @ MCS4/MCS12
25dBm @ MCS5/MCS13
24dBm @ MCS6/MCS14
23dBm @ MCS7/MCS15

802.11a (5 GHz)
26dBm @ 6~24Mbps
25dBm @ 36Mbps
23dBm @ 48Mbps
21dBm @ 54Mbps

802.11b (2.4 GHz)
7dBm @ 1~11Mbps

Software

Topology
Infrastructure/Ad-Hoc

Operation Modes
Access Point, WDS Bridge, WDS Access Point, Universal Repeater

Multiple BSSID

Supports up to 8 BSSIDs per radio

LAN
IP (check validity and DHCP server IP range) MAC

SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging

Spanning Tree
Supports 802.1d Spanning Tree Protocol

Wireless
Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only

QoS
WMM  (Wireless Multimedia)

VPN
Pass-through (PPTP, L2TP, IPSec)

WPS
Software only

Management

Tx Power Control:
Adjust transmit power by dBm

Configuration:
Web-based configuration (http)/Telnet

Telnet Server:
CLI

Firmware Upgrade:
Via web browser, settings are reserved after upgrade

Administrator Setting:
Administrator Username and Password Change

Reset Setting:
Reboot (press 1 second).
Reset to factory default (press 10 seconds)

System Monitoring:
Status Statistic and Event Log

SNMP:
V1, V2c, V3

MIB:
MIB I, MIB II (RFC1213) and private MIB

Traffic Shaping:
Incoming and outgoing wireless traffic shaping

Auto-channel Selection:
Automatically selecting least congested channel

Bandwidth Measurement:
IP range and bandwidth management

Auto Reboot:
Reboot Access Point by minute, hour, day, or week

Backup and Restore:
Save and restore settings through Web interface

CLI:
Supports Command Line Interface

Diagnosis:
IP pinging statistics

Log:
SysLog and Local Log support

LED Control:
On/Off

AP Detection:
Scanning for available EnGenius APs

Wireless Security
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 field
L2 Isolation (Access Point mode)
Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)

QoS (Quality of Service)
WMM (Wireless Multimedia)

Environmental & Physical

Temperature Range

Operating: 0 to 50ºC (32º to 122ºF)
Storage: -20ºC to 60ºC (-4Fº to 140ºF)

Humidity
(non-condensing)
Operating: 90% or less
Storage: 90% or less

Certifications
FCC, IC

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.

Dimensions & Weights

ECB600 Device
Weight: 1.06 lbs.
Width: 5.50”
Length: 7.44”
Height: 1”

Package Contents
ECB600 Dual Band N600 Indoor Access Point/Client Bridge
12V/2A Power Adapter
RJ-45 Ethernet Cable
Quick Installation Guide
CD with User Manual

Warranty
1 Year

 
Key Features / Benefits:
+ Dual Band for Expanded User Capacity
802.11n dual radio operation in 2.4 GHz and 5 GHz with up to 300 Mbps throughput speed on both the 2.4 and 5 GHz frequency bands.
+ High Power, Long-Range Coverage
29 dBm for 2.4 GHz, 26 dBm for 5 GHz RF transmit power provides more than twice greater wireless coverage over other competitors.
+ SSID-to-VLAN Tagging
Can be configured to broadcast up to eight (8) SSIDs (4 SSIDs per frequency band). Each SSID can be tagged to a specified company network VLAN for different user access based on established access rights.
+ 802.3at/af PoE Compatible
Supports Power over Ethernet (IEEE 802.3at/af) and allows deployment in areas where power outlets are not available
+ High-Gain External / Detachable Antennas
Four 5 dBi external omni-directional antennas optimizing maximum RF performance
+ Simplified AP Monitoring and Management SNMP-based wireless access point monitoring and management
 
 
 
 
 

Reviews

Write a review

Engenius ECB600 High-Powered, Long-Range Dual Band Wireless N600 Indoor Access Point / Client Bridge

Engenius ECB600 High-Powered, Long-Range Dual Band Wireless N600 Indoor Access Point / Client Bridge

Dual Band 300 + 300 Mbps
High Power, Long-Range Coverage
SSID-to-VLAN Tagging
802.3at/af PoE Compatible
High-Gain External / Detachable Antennas
Simplified AP Monitoring and Management

30 other products in the same category: